PRODUCTS

PRODUCTS FEATURES

BE-747

Chemical for Removing Iron Ions from Nickel Plating Solution

    1. Convenient usage; avoid unnecessarily lost of the plating solution

    2. Effectively co-precipitate iron and nickel ions, selectively remove impurities from the plating bath

BE-765

Chemical for Removing Zinc Ions from Nickel Plating Solution

    1. Convenient usage; add without discontinuation of operation

    2. Lower down the effect of weakened adhesion and poor low current density area from zinc contamination

BE-765C

Chemical for Removing Copper Ions from Nickel Plating Solution

    1. Particularly used in the copper ion removal from the nickel plating solution

    2. Convenient usage; add under normal operation

BE-765CW

Chemical for Removing Impurities from Nickel Plating Solution

    1. Co-precipitation with nickel layer, co-deposition without adverse effect

    2. Improve low current density area and the brightness

BE-766

Nickel Leveling Agent

    1. Enhanced plating quality and levelness

    2. Convenient usage; add under normal operation

BE-767

Covering Power Booster for Ni Plating

    1. Improved coverage power of low current density area in the nickel plating solution

    2. Suppressed pollution of nickel deposit at low current density area region

BN

Electrolytic Stripper for Plating Racks

    1. No toxic nor harmful gases produced

    2. Adequate replenishment in normal operation for long-term use

    3. Good conductivity in solution, rapid stripping

    4. No damage to the plating racks; simple usage and safe operation

BN-204

Electrolytic Stripper for Plating Racks

    1. No toxic nor harmful gases produced

    2. No damage to the edge of the hooks, extended service life of plating racks

    3. Almost neutral stripping solution, simple management and safe operation

    4. Applicable to both manual and automatic mechanical operation

    5. Good conductivity in solution, rapid stripping

BN-206

Electrolytic Stripper (soln.) for Plating Racks

    1. Electrolytically strip Cu, Ni, Cr coating off the junction contact

    2. No toxic nor harmful gases produced

    3. No damage to the edge of the hooks, extended service life of plating racks

    4. Simple management and safe operation

FeTeil

Electrolytic Stripper for Iron-substrate Defective Products

    1. A layer of protection formed after fully stripping, without hurting the substrate

    2. Simultaneously strip off Cu, Ni, and Cr layers

BK-50A

Black Dye for Copper and Copper Alloy

    1. Rapid black film effect on red copper and bronze alloy substrates

    2. Uniform gloss and non-fading

    3. Simple operation and easy management

BK-70A

Brown Dye for Copper and Copper Alloy

    1. Rapid brown film effect on copper substrate or copper-plated surface

    2. Uniform gloss, elegant texture

    3. Simple operation and easy management

BK-116

Black Dye for Copper and Copper Alloy

    1. Rapid black film effect on copper substrate or copper-plated surface

    2. Uniform gloss, excellent adhesion, and non-fading

    3. No toxic nor harmful product, safe operation

BC-100

Water Repellent

    1. Applicable to both rack and barrel plating for short-acting anti-corrosion after the plating process

    2. Featuring hydrophobicity and smoothness, preventing sweat stains

BC-336

Rust Preventant

    1. The NSS test lasts longer, enhanced anti-corrosiveness

    2. Applicable to both rack and barrel plating for water repellent, featuring hydrophobicity and smoothness, preventing sweat stains and fingerprints